- FAAC 455 D Control Board
- The 455D control board is suitable one or two 230V operators.
- suitable for swing gates
- Motor Max load 800W
- Pause time 0-4 minutes
- Enclosure not included
Technical Specifications
- 455D
- Power supply voltage
- 230 V ac (+6%-10%) 50 Hz
- Absorbed power
- 10 W
- Motor max. load
- 800 W
- Accessories max. load
- 500 mA
- Electric loack max. load
- 15VA
- Operating ambient temp
- -20°C to +55°C
- Protection fuses
- 2
- Terminal board inputs
- Open/open free leaf/Stop (closed)/Opening safety devices/power supply & earth/ opening & closing limit switches (gatecoder)
- Terminal board outputs
- Flashing lamp/motor/ 24Vdc power supply accessories/ 24Vdc Indicator light/fail safe/12 Vac electric lock power supply
- Rapid connector
- Decoding cards/ RP card receivers
- Status signalling
- via display
Functions (Programming by Display & Push Buttons)
- Function logics
- Semi-automatic, Automatic, Safety, Stepped semi-automatic, Stepped automatic, Stepped safety, Semi-automatic B, Dead man C
- Open & closing time
- Programmable (0-120s)
- Pause time
- Programmable (0- 4 min)
- Closing leaf delay
- Programmable (0- 4 min)
- Thrust power
- Adjustable on 50 levels for each motor
- Work times learning (0-120s)
- SIMPLE (work time self learning of both leaves simultaneously), COMPLETE ( work time manual learning of each leaf with possibility to activate times travel limit 'decelerations'
- Deceleration
- timed, with limit switch, with gatecoder
- Advanced Programming
- Max. torque at initial thrust
- Selectable (useful for heavy-weight leaves)
- Final stroke on closing
- Selectable (makes the locking of the electric lock easier)
- Reversing stroke
- Selectable (makes the releasing of the electric lock easier)
- Pre-flashing
- 5s (selectable)
- Opening leaf delay
- 2s (can be disabled)
- Closing photocell logic
- Reverses on release/ reverses immediately
- Fail safe (photocell test)
- Selectable
- Electric lock on second leaf
- Selectable
- Cycle count
- Selectable (up-dating of a 'count-down' - max setting 99,000 thousand cycles)
- Service count
- Selectable (when cycles set by program is reached, system activates a preflashing of 8s before every opening movement)
- Indicator light/timed output
- Selectable (indicator light output can be used as a timed output - max 4 min)
